DeRoyal TEMPLE TOUCH PRO TTP - Care and Maintenance

20
9. Care and Maintenance
CAUTION:
• Do not expose the TTP™ system to extreme temperatures,
humidity,directsunlightorshock.
• KeeptheTTP™systemawayfromhotorboilingwaterand
chemicals.
• Do not spray cleaning solutions onto any of the TTP™
components. The system is NOT water resistant.
• Do notimmerse orusewetfabricon anyofthesystem’s
componentsasmoisturemightdamagetheelectrical
components and lead to incorrect temperature
measurements.
Cleaning the MCU and SCU
CleantheMCUonanas-neededbasisorperfacilitypoliciesand
proceduresforcleaningelectronicequipment.
1. Disconnect MCU from power outlet and from the SCU.
Disconnect the MCU from the VSM.
2. Use a slightly damp so fabric moistened with a mild,
nonabrasivecleaningsoluontoclean thedevicesurface
andcables.Avoidspilloverofuidsintothesystem’sparts.
3. Drywithasofabric.
21
Disinfecng the SCU
1. Clean the SCU between each use.
2. Wipe down the SCU using a damp so fabric and 70%
isopropylalcohol.Avoidspilloverofuidsintothesystem’s
parts.
3. Drywithasofabric.
Storage
Noce: Do not store the TTP™ system components in a wet or
dampplaceasitmightdamagetheelectricalcomponents.
Store all TTP™ components at room temperature and in a dry
place when not in use.
Funconality Check
OnceEvery2years,usetheTTPFunconalityCheckkit.
Funconalitycheckinstruconswillbeprovidedinthekit.
Ifthecheckfailscontactservice.
20
9. Care and Maintenance
CAUTION:
• Do not expose the TTP™ system to extreme temperatures,
humidity,directsunlightorshock.
• KeeptheTTP™systemawayfromhotorboilingwaterand
chemicals.
• Do not spray cleaning solutions onto any of the TTP™
components. The system is NOT water resistant.
• Do notimmerse orusewetfabricon anyofthesystem’s
componentsasmoisturemightdamagetheelectrical
components and lead to incorrect temperature
measurements.
Cleaning the MCU and SCU
CleantheMCUonanas-neededbasisorperfacilitypoliciesand
proceduresforcleaningelectronicequipment.
1. Disconnect MCU from power outlet and from the SCU.
Disconnect the MCU from the VSM.
2. Use a slightly damp so fabric moistened with a mild,
nonabrasivecleaningsoluontoclean thedevicesurface
andcables.Avoidspilloverofuidsintothesystem’sparts.
3. Drywithasofabric.
21
Disinfecng the SCU
1. Clean the SCU between each use.
2. Wipe down the SCU using a damp so fabric and 70%
isopropylalcohol.Avoidspilloverofuidsintothesystem’s
parts.
3. Drywithasofabric.
Storage
Noce: Do not store the TTP™ system components in a wet or
dampplaceasitmightdamagetheelectricalcomponents.
Store all TTP™ components at room temperature and in a dry
place when not in use.
Funconality Check
OnceEvery2years,usetheTTPFunconalityCheckkit.
Funconalitycheckinstruconswillbeprovidedinthekit.
Ifthecheckfailscontactservice.