Desa BK User Manual

WARNING: ELECTRICAL GROUNDING INSTRUCTIONS This
appliance is equipped with a three-prong (grounding) plug for your
protection against shock hazard and should be plugged directly into
a properly grounded three-prong receptacle.
(Check your appliance owner’s manual for specic applications and additional instructions.)
Parts included with this kit
Part No. Description Qty
103581-04 Blower Assembly with Speed Control and 6 foot Cord • • 1
104901-01 Wire Assembly • 1
103650-01 Control Knob • • 1
103651-01 Lock Nut • • 1
11125 #8 - 1/2" Phillips Head Screw • • 1
101378-01 Thermodisc Switch, 100° Limit • 1
104902-02 Switch Mounting Bracket • 1
109892-01 Speed Control Bracket (Stamped Face Models) • 1
109892-02 Speed Control Bracket (Panel Louver Models) • 1
Tools Required
• Pliers
• Phillips Screwdriver
• Flat Blade Screwdriver
If any of these pieces are missing or damaged, or if the installation instructions for your replace or
stove are not included in this manual, contact the dealer where you purchased this kit or DESA Heating
Products at 1-866-672-6040 for referral information.
MODEL BK
MANUALLY CONTROLLED
BLOWER
MODEL BKT
THERMOSTATICALLY
CONTROLLED BLOWER
BK AND BKT BLOWER ACCESSORY
INSTALLATION INSTRUCTIONS
BK BKT

Desa BK Specifications

General

Brand	Desa
Model	BK
Category	Blower
Language	English

Summary

BK and BKT Blower Installation Overview

Electrical Grounding Safety Warning

Crucial safety warning about electrical grounding for shock hazard protection.

Included Parts List

Lists all parts included in the blower accessory kit for installation.

Required Tools

Lists essential tools needed for the installation process.

Electrical Outlet Safety Warning

Safety warning regarding electrical outlet usage during installation.

Louver Panel Removal

Removal for Wood, B-Vent, Vent-Free Models

Instructions for removing the louver panel on specific fireplace models.

Removal for Direct-Vent Models

Instructions for removing louvers on direct-vent fireplace models.

Louver Removal with Spring Latches Diagram

Diagram showing louver removal using spring latches.

Louver Removal with Bullet-Style Clips Diagram

Diagram showing louver removal using bullet-style clips.

Blower Wiring and Assembly

Model BK Wiring Assembly Notes

Notes on speed control switch installation limitations for Model BK.

Model BK Blower Installation Diagram

Illustration of the Model BK blower installation.

Model BKT Wiring Assembly Notes

Notes on BKT blower installation specific to direct-vent models.

Model BKT Blower Installation Diagram

Illustration of the Model BKT blower installation.

Speed Control Mounting

Mounting Speed Control on Direct-Vent Models

Instructions for mounting the speed control on direct-vent models.

Speed Control Mounting for Panel Louvers

Steps for installing speed control on panel louver fireboxes.

Speed Control Mounting for Stamp Face Louvers

Instructions for attaching speed control to stamp-faced louvers.

Speed Control Mounting Diagram (Stamp Face Louvers)

Diagram for attaching speed control to stamp-faced louvers.

Connecting Power and Operating the Blower

Blower Wheel Operation Safety Caution

Critical safety caution against touching the blower wheel during operation.

BK Model Operation

Instructions for operating the BK model blower.

BKT Model Operation

Instructions for operating the BKT model blower with thermal control.

Wiring Diagram Decal Location

Shows the placement of the wiring diagram decal.

Blower System Wiring Diagram

Electrical wiring diagram for the blower system.