Need help?Do you have a question about the Det-Tronics GT3000 Series and is the answer not in the manual?
General| Model | GT3000 Series |
|---|---|
| Ingress Protection | IP66/67 |
| Gas Types | Combustible gases |
| Detection Range | 0-100% LEL (Lower Explosive Limit) |
| Output Signal | 4-20 mA, HART |
| Operating Temperature | -40°C to +75°C (-40°F to +167°F) |
| Humidity Range | 0-99% RH, non-condensing |
| Enclosure Material | Stainless Steel or Aluminum |
Details the GT3000 series electrochemical gas detector and its components.
Explains the GTS electrochemical sensor cell and its capillary diffusion barrier technology.
Covers automatic recognition, HART communication, event logs, RTC, magnetic switch, and LEDs.
Lists operating voltage, power, current, wiring, temperature, dimensions, and life.
Details certifications like FM, CSA, IECEx, and mentions warranty information.
Crucial precautions for wiring, installation, device modification, and handling.
Covers application considerations, mounting orientation, detector installation, and wiring requirements.
Details calibration initiation, automatic process, LED guidance, and fault handling.
Explains hot-swappable sensor replacement without power interruption.
Outlines the procedure for obtaining RMA and returning devices for repair.
Lists GTS sensors, calibration kits, parts, and model matrices for sensors and transmitters.
Details specific approval standards and conditions for FM, CSA, and IECEx certifications.
Compares sensor performance and outlines HART communication protocols and menu structure.
Provides FM and CSA intrinsic safety control drawings, including entity parameters and installation notes.
To Next Page
