Detecto P220 - Page 30

30
www.Detecto.com
UNIVERSAL GLOVE BOX HOLDERS
The model GH2 Universal Glove Box Holders stores two boxes.
Full Frame Glove Box Holders
Detecto’s model GH Glove Box Holders are available in three different sizes.
Fit one glove box in the small GH1, two boxes side by side in the GH2, and
three boxes side by side in the GH3. The all-steel construction with white
powder coat fi nish carries a Detecto lifetime guarantee. The units install in
seconds via screwholes and the GH1 also features a snap-on clip in back. The
open design allows you to see what size or type of glove is being dispensed.
MODEL DIMENSIONS
UPC CODE
GH1
Holds 1 Box
10.5” H x 6.5” W x 4.25” D /
27 cm H x 17 cm W x 11 cm D
809161133004
GH2
Holds 2 Boxes
10” H x 12” W x 4” D /
25 cm H x 30 cm W x 10 cm D
809161133103
GH3
Holds 3 Boxes
10” H x 18” W x 4” D /
25 cm H x 46 cm W x 10 cm D
809161133202
Wire Frame Glove Box Holders
Conserve counter space with Detecto’s Universal Glove Box Holders. Avail-
able in two sizes, the standard and large glove box holders fi rmly hold two
boxes upright or one box lying down. The open design allows you to see
what size or type of glove is being dispensed. The holders accomodate most
glove boxes and are universal enough to be used for tissue holders where
counter or shelf space is conservative.
MODEL DIMENSIONS
UPC CODE
HOLDIT
Standard Size
4.75” H x 10.75” W x 3.125” D /
12 cm H x 27 cm W x 8 cm D
809161132007
HOLDIT-L
Large Size
4.75” H x 11.125” W x 3.5” D /
12 cm H x 28 cm W x 9 cm D
809161132106
The all-steel construction with white powder coat
fi nish carries a Detecto lifetime guarantee.
The units install in seconds with the included
mounting hardware.
The model GH1 holds one box lying down snugly and accomodates
most gloves boxes (shown to the right).
The GHs are universal enough to be used for tissue holders where
counter or shelf space is conservative (shown to the lower right).
UNIVERSAL GLOVE BOX HOLDERS
UNIVERSAL GLOVE BOX HOLDERS
Detecto’s model GH Glove Box Holders are available in three different sizes.
Fit one glove box in the small GH1, two boxes side by side in the GH2, and
three boxes side by side in the GH3. The all-steel construction with white
powder coat fi nish carries a Detecto lifetime guarantee. The units install in
seconds via screwholes and the GH1 also features a snap-on clip in back. The
open design allows you to see what size or type of glove is being dispensed.
MODEL
GH1
MODEL
GH3
MODEL
GH2