What to do if Detecto solo display does not turn on?
If the Detecto Scales display doesn't turn on, try the following: * Ensure batteries are correctly installed. * Replace discharged batteries with new ones. * Confirm the 9V AC/DC power adapter is fully inserted into the wall receptacle. * Check the wall receptacle for proper AC power by testing with another appliance. * Check the circuit breaker. * Consider if there has been a power failure.
What to do if Detecto solo Scales display shows and shuts off?
If the Detecto Scales display shows and shuts off, remove any weight from the platform and power up the scale again. If the issue persists, consult your scale service representative.
How to fix Detecto Scales when display shows a moving small ?
If the Detecto Scales display shows a moving small , ensure the scale is stable and wait for a moment until the display shows . If the issue continues, please consult your scale service representative.
Procedure for removing components from the shipping carton and verifying contents.
Connect the lower inside column to the pre-assembled display and upper column.
Attach the lower outside column, connecting the cable and securing with screws.
Step-by-step guide on how to perform a standard weight measurement.
Steps to perform re-calibration using test weights for accuracy.
To Next Page
General
