CUSTOMER ACCESSIBLE PARAMETERS
Customer Accessible Parameters
Table 4.
Parameter Name Default Value Description
OI Target Engine RPM ae 0 1000.0 RPM See table below
OI Target Engine RPM ae 1 1000.0 RPM
OI Target Engine RPM ae 2 1000.0 RPM
OI Target Engine RPM ae 3 1000.0 RPM
OI Target Engine RPM ae 4 1000.0 RPM
OI Lower Limit Continuous
Run
-4.00°C Limit for disabling OI
Thermostat Mode.
OI Upper Limit Continuous
Run
32.00° C
OI Thermostat Max Time 0 s Maximum amount of time the
engine can run in Thermostat
Mode. (0 = infinite)
OI Enable Therm Ext Mode R33 and earlier: 0 disable Configures the feature of
disabling OI Thermostat
Mode based on ambient air
temperature.
R34 and later: 0 Normal OI
Thermostat Mode
OI Alternate Battery Run
Time
0 s Sets the alternate run time
for battery starts.
OI Extended Mode Disable 0 enable Status of OI Extended Idle
Mode.
OI Continuous Batt Time
Enable
0 disabled If OI has started the engine
for battery voltage three
consecutive times, the
engine will run continuously
in OI Mode.
OI Variable Volt Thresh
Enable
0 disabled Battery voltage threshold will
be based on ambient air
temperature.
CUSTOMER ACCESSIBLE PARAMETERS
26 All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION DDC-SVC-MAN-0019