To Next PageTo Next Page
Need help?Do you have a question about the Dettson CMO32-II and is the answer not in the manual?
Explains hazard severity levels indicated by DANGER, WARNING, CAUTION.
Emphasizes qualified personnel, adherence to codes for safe installation.
Requirements for water heater placement regarding surface and proximity.
Importance of providing access for cleaning and servicing.
Lists parts included in the shipping cartons.
Instructions for connecting water lines and relief valve discharge.
Guidance on connecting the flue pipe to the chimney or vent.
Specifies installation of the draft regulator between heater and chimney.
Explains the function and installation of the BVSO safety device.
Refers to CSA Standard B-139 for chimney requirements.
Instructions for mounting and setting the aquastat control.
Details on connecting the BX harness and wiring controls.
Explains the function of the combustion primary control.
Steps for installing the oil burner, nozzle, and electrode.
Refers to Technical Specifications (Table 2) for nozzle details.
Information on the fuel oil pump's pressure and connections.
Requirements for oil tank installation, shut-off valve, and oil lines.
Discusses requirements for ventilation and combustion air.
Step-by-step guide for the initial startup procedure.
Instructions for adjusting draft and combustion air for optimal performance.
Procedures for safely shutting down the unit.
Procedure to test the functionality of the BVSO safety device.
Steps to take when flame failure occurs.
General maintenance tasks and recommended frequencies.
Instructions for cleaning and maintaining the BVSO.
Detailed steps for cleaning various components of the unit.
Step-by-step guide for replacing the combustion chamber.
General| Brand | Dettson |
|---|---|
| Model | CMO32-II |
| Category | Water Heater |
| Language | English |
