Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking
zones.
2. Touch the timer control, the timer indicator will start flashing
and “30” will show in the time display.
3. Adjust the timer setting by touch the “-” or “+” controls.
The minute minder indicator will start flashing and will show
in the timer display.
Hint: Touch the “-” or “+” control of the timer once to
decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of the timer to decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4.Touching the ‘Timer’, the timer is cancelled, and the “--” will show in the minute
display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will beep for 30 seconds and the timer indicator
shows “- -” when the set time finished.
To Next Page
Loading...