Setting the timer to turn one cooking zone off
1. Touching the heating zone selection control.
2. Touch the timer control, the timer indicator will start
flashing and “30” will show in the time display.
3. Set the time by touching the control of the timer
Hint: Touch the “-” or “+” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of the timer will decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. Touching the heating zone selection control, and then touch the “Timer”, the
timer is cancelled, and the “--” will show in the minute display.
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
To Next Page
Loading...