What to do if my DEVI devireg 532 has no heat?
If your DEVI Thermostat isn't producing heat, start by checking the main fuse, the residual current device (RCD), and other safety devices. If those are fine, ensure all cables connected to the thermostat are properly installed. As a last resort, consider replacing the thermostat or the NTC sensor.
Why is my DEVI devireg 532 Thermostat always on?
If your DEVI Thermostat is providing constant heat, it could be due to a relay being constantly on or a floor sensor interrupt. Try replacing the thermostat or replacing the NTC sensor.
General| Type | Electronic thermostat |
|---|---|
| Temperature range | +5°C to +45°C |
| Control | Dial |
| Voltage | 230 V AC |
| IP Class | IP31 |
| Protection class | II |
| Dimensions | 85 x 85 x 36 mm |
| Frequency | 50/60 Hz |
| Power supply | 230 V AC |
| Installation | Flush mounting |
| Switching voltage | 230 V AC |
| Ambient temperature | -10 to +30°C |
| Storage temperature | -20°C to +65°C |
To Next Page
