When installing the devireg
™
540/550 you need to choose
the type of heating and thus which sensors should be used.
DEVI
™
recommend always to install the fl oor sensor !
Comfort Heating:
- Constant temperature on the fl oor in e.g. bathrooms and
other rooms that are often used with bare feet.
- Install the Floor sensor and choose only the Floor sensor
in Basic Settings.
Total Room Heating:
- Control of room temperature in living rooms etc.
- Install the Floor sensor and choose both Floor sensor and
Room sensor in Basic Settings.
No Floor Sensor:
- A fl oor sensor is not present, and cannot be installed.
- Choose Room sensor only in Basic Settings.
- Be aware that temperature control is less accurate without
the fl oor sensor. DEVI
™
recommend that a fl oor sensor is
installed.
Do NOT use devireg
™
540/550 without fl oor sensor
when the heating element is installed on or beneath
wooden surfaces !
8
To Next Page
Loading...
