Why does my DeVilbiss ADVANCE HD HVLP Paint Sprayer have a split spray pattern?
If your DeVilbiss Paint Sprayer has a split spray pattern, reduce the air pressure at the regulator or gun handle. Turn out the fluid adjusting knob counter-clockwise to achieve the correct pattern. Adjust the spreader adjusting valve by turning it in clockwise to achieve the correct pattern.
Why is my DeVilbiss Paint Sprayer leaking from the packing nut?
If fluid is leaking from the packing nut of your DeVilbiss Paint Sprayer, replace the worn packing or fluid needle.
General| Brand | DeVilbiss |
|---|---|
| Model | ADVANCE HD HVLP Series |
| Category | Paint Sprayer |
| Language | English |
Covers flammability of solvents and coating materials, compliance with codes, and static electricity precautions.
Recommends respiratory, eye, and hand protection compatible with sprayed materials.
Warns against aiming the gun at people, exceeding pressure, using non-original spares, and improper cleaning.
Advises on potential high noise levels and recommends ear protection.
Highlights potential recoil forces and strain injuries from high-pressure spraying.
Instructions for servicing and replacing the air valve, including cleaning and component checks.
Addresses horn hole obstructions, fluid nozzle issues, and air cap cleaning for pattern defects.
Focuses on obstructions in side horn holes and dirt on the fluid nozzle sides.
To Next Page