This Product is designed for use with:
Solvent and water based materials
Suitable for use in hazardous area:
Notified body details and role:
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Providing all conditions of safe use / installation stated within the product manuals have been complied with and
also installed in accordance with any applicable local codes of practice.
Signed for and on behalf of Finishing Brands
UK Ltd:
Lodging of Technical file
This Declaration of conformity /
incorporation is issued under the sole
responsiblility of the manufacturer:
Finishing Brands UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
EU Declaration of Conformity
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonised standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
BS EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
EN 14462:2005+A1:2009 Surface treatment equipment - Noise test code for surface treatment equipment
including its ancillary handling equipiment - Accuracy grades 2 and 3
EN 1127-1:2011 Explosive atmospheres - Explosion prevention - Basic concepts
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres - Basic methods and
requirements
HVLP and High Efficiency products comply with the requirements of PG6 from the EPA guidelines and offer
greater than 65% transfer efficiency.
Product Description / Object of Declaration:
To Next Page
Loading...
