SB-2-194-K Page 7
Spray Gun Lube
SSL-10 (2 oz. bottle)
Compatible with all paint materials;
contains no silicone or petroleum
distillates to contaminate paint. MSDS
Sheet available upon request.
HARG-510
Air Regulator
Use to maintain nearly
constant outlet pressure
despite changes in in-
let pressure and down-
stream flow.
HAV-500 OR
HAV-511
Adjusting Valve
(HAV-511 SHOWN)
HAV-500 does not
have pressure gauge.
Use to control air
usage at gun.
Gun holders are made
to hold standard paint
cups, gravity feed
guns and cups, and
paint filters.
Contains all necessary
tip, hose and nut sizes
used on or with gun.
WR-103 Wrench
ACCESSORIES
OMX-70-K48 Paint Cup Liner Kit
Allows quick & easy clean-up.
Consists of : 1 - Piercing Tool, 48 - Disposable
Liners, 48 - Drain Bushings
Automotive Quick Connects (Air)
High Flow Type.
HC-4720 Coupler
1/4" NPT(F)
HC-1166 Stem
1/4" NPT(M)
HC-4419 Stem
1/4" NPT(F)
HC-4719 Coupler
1/4" NPT(M) /NPS(M)
NIOSH-Certified
(TC84A-1623) for respiratory
protection in atmospheres not
immediately dangerous to life.
40-128 Twin Cartridge,
Paint Spray Respirator
GH-505 Gun Holder
HAF-507 Whirlwind™
In-Line Air Filter
Removes water, oil, and debris
from the air line.
192218 Scrubs
®
Hand Cleaner Towels
Scrubs
®
are a pre-moist-
ened hand cleaner towel
for painters, body men
and mechanics that go
where you go and no
water is needed.
192212 Professional Spray Gun
Cleaning Kit
Contains six preci-
sion tools designed
to effectively clean
all DeVilbiss, Binks,
Finishline and other
brand spray guns.
Gun holder made
to hold guns with
gravity cups.
192219
Gun Holder
GFC-501 (Acetal) 20 oz.
702576 (Aluminum) 900 cc
Gravity Feed Cups
These gravity feed cups are
designed to be used with FLG,
GFG, GFHV or GTI gravity feed
spray guns.
To Next Page
Loading...
