DeVilbiss PRO AIR Series - Functional Description; PRO AIR 1 Filter; PRO AIR 2 Coalescer; PRO AIR 3 Activated Carbon Filter

EN
as above, but to include a Coalescer - This removes the smallest amounts of liquid and
solids down to 0.01µm. The liquid droplets are captured on micro fibres, these form
larger droplets and collect in the bowl which can be drained using the plug at the base
of the bowl.
PRO AIR 2
as above, but to include an Activated Carbon element - This element filters in a similar
way to the coalescer, but will remove oil carry over to 0.003 ppm.
PRO AIR 3
185 330 395
Semi-Automatic
Element Life
1000 Hours
Filter condensate/ Coalescer drain
Air supply pressure
Regulated air pressure
Height
1/4" BSP male x 2 with shut off valve
1/8" BSP female
Shut of valves - Each of the 2 outlets can be isolated independently.
SPECIFICATIONS
PROAIR-3
Degree of
filtration:
3.7.4 1.7.2 1.7.1
Output air quality class
3500 l/min 900 l/min 900 l/min
FUNCTIONAL DESCRIPTION
Gauge range
Air Supply Connection
PRO AIR is a range of compact compressed air regulator and filters suitable for 1 or 2 operators. PRO
AIR 2 and 3 are suitable for use with Respiratory Personal Equipment such as the Devilbiss PRO
VISOR and Half Mask kits.
PRO AIR 1
Filter - Incoming air is rotated by a centrifuge unit to remove the heaviest liquid and
solid particles. The remaining solid particles are collected by a porous filter to 5µm. The
accumulated liquid can be drained using the plug in the base of the bowl.
Regulator - This allows the input pressure to be reduced to a stable output pressure
following initial filtering.
Weight
Air flow
280 280 280
0- 11 bar (0- 160psi)
PROAIR-2
2300g 3375g 4205g
Operating temperature
ISO8573-1:
Maximum:
13 bar
0- 8 bar
80°C
PROAIR-1
1/2" BSP female
Width
Size:
Air Outlet Connections
Gauge port
SB-E-8-310 R1.0
2/8