Pro Air 1, 2, 3
Product Description/Object of Declaration:
Zone 1
The Machinery Directive 2006/42/EU does not apply to the above products as they are not considered
machines/quasi machines nor are they safety products. Both CETOP (European Fluid Power Committee) and the
Machinery Working Group of the European Commission have made a clear statement in this sense. Please refer
to the CETOP document.
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonized standards:
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres - Basic methods and
requirements
EN 13463-5:2011 Non electrical equipment for use in potentially explosive atmospheres - Protection by
constructional safety "c"
Notified body details and role:
II 2G IIB D c T5
Suitable for use in hazardous area:
Protection Level:
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation and regulations
EU Declaration of Conformity
This Declaration of conformity/ incorporation
is issued under the sole responsibility of the
manufacturer:
Finishing Brands UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Providing all conditions of safe use / installation stated within the product manuals have been
complied with and also installed in accordance with any applicable local codes of practice.
D Smith
Director of Sales (EMEA)
Signed for and on behalf of Finishing Brands
UK Ltd:
20/4/16
Bournemouth,BH11 9LH,UK
SB-E-8-310 R1.0
3/8
To Next Page
Loading...
