Introduction
Box contents:
1x D-series amplifier (D-200, D-400, D-600)
1x power cable IEC C13 to Schuko (3x 1 mm²)
1x power cable IEC C13 to UK (3x 1 mm²)
Unit and accessory inspection
- Always use the supplied power cable to connect the unit to a power supply. If the cable appears broken or
has visible damage, do not use it.
- If you do not intend to use the unit for an extended period of time, disconnect it from the power supply and
store it in a dust-free environment.
- Always check the unit for possible damage before use. If you suspect that something is wrong with the unit,
do not connect it to a power source! If you suspect that your unit is broken or damaged, contact your local
dealer or a certified technician to inspect the unit.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 4.0 Creation date + author initials: 11-12-2015 RV Revision date + author initials: 10-12-2015 RV
To Next Page
Loading...