4. The app will then display its connecting screen.
NOTE if the heater is failing to connect, press and
hold the button for three further seconds. It will
then switch to its secondary connection mode. The
heater has two connection modes: one where the
icon flashes slowly (once per second) and one
where the icon flashes fast (three times per
second). Most devices will connect on the fast
flashing mode.
5. The heater will beep and display a solid icon when the device is connected.
The app will confirm that the heater has been added. You can now name the
device, share it with family members, or proceed to scheduling your heating.
To Next Page
Loading...
