5
Installation
Warning
1. Fix the heater correctly on the wall or place the heater in the sturdy position.
2. The heater should be installed so that the controls cannot be touched by a person using a bath
or shower.
3. The heater should be installed so that it is not located directly under a socket outlet.
Clearances
Mounting Guide
Caster Installation & Removal
This heater MUST be installed to the
minimum required distances at the
four sides of the heater.
Push the button up to remove
the caster
1. Insert the bracket (into the hole), turn it 90° anti-clockwise
to fasten the screw
2. Press the rubber pad (in the hole), fasten it with the screw).
Push the button up to remove
the caster
To Next Page
Loading...
