Devolo 200 AV User Manual

Connection and startup
|
|
devolo dLAN 200 AV
|
8
2 Connection and startup
This chapter covers the connectors and display elements of your dLAN 200 AV
and explains how to connect the device.
2.1 System requirements
 Operating systems: Windows 98, Windows Me, Windows 2000, Windows
XP, Linux, Mac OS X and any other operating system with network support
 Ethernet connection
Please note that your computer or other device must feature a network adapter
with an Ethernet port.
To set up a dLAN 200 AV network, you need two dLAN 200 AV devices.
2.2 Connection and display elements
The dLAN 200 AV features 3 control LEDs as well as an Ethernet port:
Power Is lit red when the dLAN 200 AV is ready for operation;
is lit green when the dLAN 200 AV is in Power Save mode.
dLAN Link/Act Is lit red if connected to the dLAN 200 AV network,
flashes red when data are being sent or received over the
power lines.

Devolo 200 AV Specifications

General

Data Transfer Rate	200 Mbps
Encryption	128-bit AES
Ethernet Ports	1
Type	Powerline Adapter
Ports	Ethernet
Standards	HomePlug AV
Model	dLAN 200 AV