Devolo dLAN 500 WiFi User Manual

68 Network configuration
devolo dLAN 500 WiFi
WPS via PBC (Push Button Configuration):
햲 Start the encryption process on the
dLAN 500 WiFi
쑗 either by tapping the WPS button on the
front panel of the device or
쑗 by pressing the Start setup button on the
user interface under WLAN configuration 
Wi-Fi Protected Setup (WPS).
햳 Then press either the WPS key of the Wi-Fi client
you are adding or the WPS button on the configu-
ration interface. Now the devices exchange their
encryption keys and establish a secure Wi-Fi con-
nection. The Wi-Fi LED on the front panel indi-
cates the synchronisation process by flashing.
WPS via PIN:
햲 To interconnect Wi-Fi stations securely in your
wireless network via PIN variants, enter an indi-
vidualised key in the configuration interface under
WLAN configuration  Wi-Fi Protected
Setup (WPS)  PIN and start the encryption pro-
cess by pressing the Start setup button.
햳 Open the configuration interface of the Wi-Fi cli-
ent to be added and transmit the PIN selected on
the dLAN 500 WiFi. Confirm the encryption pro-
cess as described there. Now the devices
exchange their encryption keys and establish a
secure Wi-Fi connection. The Wi-Fi LED on the
front panel indicates the synchronisation process
by flashing.
Use of the WPS process implies either WPA or WPA2.
For that reason, keep in mind the following automatic
settings depending on the encryption standard (also
refer to 6.4.1 Device security), i.e.
쎲 if under WLAN configuration  Access Point
No encryption or WEP is selected in advance,
WPA2 is set automatically. The newly generated
password is displayed under Wi-Fi configura-
tion  Access Point in the Key field.
쎲 if under WLAN configuration  Access Point
WEP is selected in advance, WPA2 is set auto-
matically. The newly generated password is dis-
played under WLAN configuration  Access
Point in the Key field.
쎲 if under WLAN configuration  Access Point
WPA is selected in advance, this setting remains
with the previously assigned password.
쎲 if under WLAN configuration  Access Point
WPA2 is selected in advance, this setting remains
with the previously assigned password.

Devolo dLAN 500 WiFi Specifications

General

Interface	Ethernet / WLAN
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Safety	CE B
Chipset	-
Internal	No
Product color	White
Modulation	1024-QAM, 256-QAM, 4096-QAM, 64-QAM, BPSK, OFDM, QPSK
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100BaseT(X)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Security algorithms	128-bit AES, WEP, WPA, WPA2, WPS
Maximum indoor range	300 m
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	500 Mbit/s
Supported network protocols	CSMA/CA
AC input voltage	196-250 V
AC input frequency	50 Hz
Power consumption (typical)	4.4 W
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	41 mm
Width	68 mm
Package depth	190 mm
Package width	115 mm
Package height	81 mm
Package weight	260 g