Installation 13
devolo dLAN pro 1200 DINrail
3 Installation
In this chapter we describe the electrical installation of
the dLAN pro 1200 DINrail on the top-hat rail in the
power distribution box.
Package contents
Please ensure that the delivery is complete before be-
ginning with the installation of your
dLAN pro 1200 DINrail.
쎲 dLAN pro 1200 DINrail
쎲 Ethernet cable
쎲 CD containing software and online documenta-
tion
devolo AG reserves the right to change the package
contents without prior notice.
System requirements
쎲 Operating systems: Windows 7 (x86/x64), Win-
dows 8.1 (86/x64), Windows 10 (x86/x64), Linux
Ubuntu (x86/x64), Mac OS X) and all operating
systems with network support
쎲 Gigabit-Ethernet connection
3.1 Important safety instructions
All safety and operating instructions should be read
and understood before using the device, and should be
kept for future reference.
Installation may be performed by a
qualified electrician only (in acc. with
German Low Voltage Connection Or-
dinance (NAV)*, Part 2, §13).
Components powered by the mains
supply have to be secured with a cir-
cuit breaker.
An easily accessible disconnecter
(such as a circuit breaker) must be
available for each connected exter-
nal conductor.
쎲 The device is intended for installation on the top-
hat rail in the installation area of overvoltage cat-
egory 3 or lower.
쎲 Never open the device. There are no user-servi-
ceable parts inside the device.
쎲 Use the device in a dry location only.
쎲 Do not insert any objects into the openings of the
device.
*for Germany: NAV = Niederspannungsanschluss-
verordnung (Low-voltage Connection Ordinance) of
3 September 2010
To Next Page
Loading...
