Devolo dLAN pro 1200+ PoE - Poe Operation

14 Introduction
devolo dLAN pro 1200+ PoE
2.3.4 PoE operation
The Ethernet port on the dLAN pro 1200+ PoE can
provide power to a connected device in accordance
with IEEE 802.3af class '0'.
By default, PoE functionality of the
dLAN pro 1200+ PoE is enabled.
You can disable the PoE functionality of the
dLAN pro 1200+ PoE for 10 seconds to briefly dis-
connect the connected device from the mains supply
and restart it.
There are two methods of disabling PoE functionality
for the dLAN pro 1200+ PoE:
Using the PoE button
햲 Press the PoE button with the lightning symbol on
the front panel of the device.
햳 PoE functionality is re-enabled automatically after
10 seconds.
Using dLAN AVpro manager
햲 Select the network with the dLAN pro 1200+ PoE
in the dLAN networks window.
햳 In the dLAN network view, click the device in
question with the right mouse button to open the
context menu of the device.
햴 Click the menu item called Reset PoE to disable
the PoE functionality of the Ethernet port for 10
seconds. This interrupts the power supply to the
connected device, which in turn switches off for
10 seconds.
If the device in question is part of the
network, disabling PoE functionality
can have effects on the accessibility,
for example, of terminal devices.