Need help?Do you have a question about the Devolo Magic 2 LAN DINrail and is the answer not in the manual?
General| Wi-Fi | - |
|---|---|
| Ethernet LAN | Yes |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 1 |
| Maximum data transfer rate | 2400 Mbit/s |
| Certification | CE |
| Product color | White |
| Quantity per pack | 1 pc(s) |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | 0 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| AC input voltage | 196 - 250 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.7 W |
| Power consumption (typical) | 4.8 W |
| Harmonized System (HS) code | 85171800 |
Weight and Dimensions| Depth | 92 mm |
|---|---|
| Width | 118 mm |
| Height | 190 mm |
| Antenna length | 405 mm |
Installation must be performed by qualified personnel with relevant electrotechnical knowledge and experience.
Diagram illustrating a 3-phase electrical installation without a residual current circuit breaker.
Diagram illustrating a 1-phase electrical installation without a residual current circuit breaker.
Diagram illustrating a 3-phase electrical installation with a residual current circuit breaker.
Diagram illustrating a 1-phase electrical installation with a residual current circuit breaker.
Guide on how to automatically pair devolo Magic adapters within an existing network.
Explanation of Power-LED, Powerline-LED, and Ethernet-LED flashing behaviors and meanings.
Details on the PLC Button actions like pairing, reset, and reboot with corresponding LED feedback.
Information on where to download the manual and find support in different languages.
To Next Page
