41 Network configuration
devolo WiFi 6 Repeater 5400
WiFi Clone
This menu is available in access point mode
only.
WiFi Clone makes it possible to simply copy the
Wi-Fi configuration data of an existing Wi-Fi access
point (e.g. your Wi-Fi router) to all Wi-Fi access
points (Single SSID). Start the procedure with the
Start Configuration option and then press the
WPS button of the device with the Wi-Fi access
data (SSID and Wi-Fi password) to be applied.
4.5.6Schedule control
This menu is available in access point mode
only.
The Schedule control area lets you define when
and if your Wi-Fi is switched on and off.
Enabling Wi-Fi schedule control
In order to be able to use time control, activate the
Enable option.
Configuration
You can define multiple time periods during which
your wireless network is to be enabled for each
WiFi_6_Repeater_5400.book Seite 41 Dienstag, 31. Mai 2022 6:26 18
To Next Page
Loading...
