Devon 5401-Li-20RH - Tool Specifications

page 12Manual_Revised_V1.1
2. TOOL SPECIFICATIONS
Model 5401-Li-20RH/N
Motor(V) 20
No-load speed(/min) 0-1400
Drilling capacity
in wood(mm) 28
in metal(mm) 13
in concrete(mm) 22
Battery type Lithium-Ion
Charger input (V) 220-240~
Battery voltage (V) 20
Allowable temperature range(
℃
) 5-40
NOTE
1. Due to
’s continuing program of development, the specications herein are subject of
change without prior notice.
2. The values given are valid for nominal voltages [U] of 220 V. For lower or higher voltages and
models for specic countries, these values can vary.
3. 5401-Li-20RH is set
,
with battery and charger; 5401-Li-20RH/N is bare tool,without battery and charger.