5
ENGLISH
HEAVY DUTY ROTARY HAMMER DRILL
D25002/D25003
Congratulations!
You have chosen a DEWALT Power Tool. Years of
experience, thorough product development and
innovation make D
EWALT one of the most reliable
partners for professional Power Tool users.
Technical data
D25002 D25003
Voltage V 120/220 120/220
Power input W 600 650
No load speed min
-1
0 - 1,150 0 - 1,150
Load speed min
-1
0 - 820 0 - 820
Impact energy J 2.4 2.4
Maximum drilling range in
steel/wood/concrete mm 13/30/22 13/30/26
Chiselling no yes
Core drilling capacity in
soft brick mm - 65
Tool holder SDS-plus
®
SDS-plus
®
Collar diameter mm 43 43
Weight kg 2.3 2.3
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
D25002/D25003
DEWALT declares that these Power Tools have been
designed in compliance with: 89/392/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55104,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to EN 50144:
D25002 D25003
L
pA
(sound pressure) dB(A)* 97 97
L
WA
(acoustic power) dB(A) 105 105
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
D25002 D25003
10 m/s
2
10 m/s
2
Powerful high frequent interference may cause
speed oscillations up to 20%. These, however,
disappear as soon as the interference is
suppressed.
Director Engineering & Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
To Next Page
Loading...
Need help?
General
