DeWalt D25102(K) User Manual

D25102(K)
D25103K
D25104K
D25203K
www.
.eu

DeWalt D25102(K) Specifications

General

Voltage	230 V
Chuck Type	SDS-Plus
Max. Drilling Capacity [Steel]	13 mm
Max. Drilling Capacity [Wood]	30 mm
Power Source	Corded Electric

Summary

HEAVY-DUTY ROTARY HAMMER

Technical Data

Provides detailed technical specifications for the rotary hammer models.

Congratulations

Congratulates the user on choosing a DEWALT power tool.

EC-Declaration of Conformity

Product Models Declaration

Declares DEWALT power tools comply with relevant EU directives and standards.

General Safety Warnings

Work Area Safety

Guidelines for maintaining a safe and controlled work environment.

Electrical Safety

Using an Extension Cable

Instructions for using extension cables safely and correctly.

Personal Safety

Power Tool Use and Care

Guidelines for safe operation, maintenance, and storage of power tools.

Service and Accessories

Additional Safety Instructions for Rotary Hammers

Specific safety precautions for operating rotary hammers.

Package Contents

Lists the items included in the product package.

Description (Fig. A)

Identifies the main parts of the rotary hammer drill with a diagram.

Assembly and Adjustment

Selecting the Operating Mode (Fig. B1, B2)

Explains how to select the correct operating mode for the tool.

Residual Risks

Lists potential residual risks associated with tool usage.

Tool Fitting and Adjustment

Indexing the Chisel Position

Details on how to index the chisel into 51 positions.

SDS-plus® Accessories

Instructions for inserting and removing SDS-plus® accessories.

Side Handle and Depth Setting

Guides for fitting the side handle and setting the drilling depth.

Forward/Reverse Slider

Explains the operation of the forward/reverse direction control.

Operation Instructions

Replacing the Dust Cover (Fig. C)

Instructions for replacing a worn dust cover.

Switching On and Off (Fig. A)

Explains how to turn the tool on, off, and use continuous operation.

Hammer Drilling (Fig. A)

Steps for performing hammer drilling with solid or core bits.

Advanced Operations

Rotary Drilling (Fig. A)

Instructions for performing rotary drilling operations.

Screwdriving (Fig. A)

Steps for performing screwdriving operations.

Chipping and Chiselling (Fig. A)

Steps for performing chipping and chiselling operations.

Maintenance and Environment

Maintenance

General information on tool maintenance and service.

Protecting the Environment

Guidelines for proper disposal and recycling of the product and packaging.