DeWalt D25102 - Page 23

23
ENGLISH
HEAVY DUTY ROTARY HAMMER DRILL
D25102(K)/D25102C/D25103K/D25104K/
D25203K
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
DEWALT one of the most reliable partners for professional power tool users.
Technical data
D25102(K) D25102C D25103K D25104K D25203K
Voltage V 230 230 230 230 230
(U.K. & Ireland only) V 230/115 230/115 230/115 230/115 230/115
Power input W 650 650 680 680 710
No-load speed min
-1
0 - 1,100 0 - 1,100 0 - 1,100 0 - 1,100 0 - 1,100
Load speed min
-1
0 - 800 0 - 800 0 - 800 0 - 800 0 - 800
Impact energy
hammer drilling J 2.8 2.8 2.8 2.8 2.8
chiselling J - - 3.0 3.0 3.1
Maximum drilling range in
steel/wood/concrete mm 13/30/22 13/30/22 13/30/24 13/30/24 13/30/26
Chisel positions - - 51 51 51
Core drilling capacity in soft brick mm 65 65 65 65 65
Tool holder SDS-plus
®
SDS-plus
®
SDS-plus
®
SDS-plus
®
SDS-plus
®
Collar diameter mm 54 54 54 54 54
Weight kg 2.55 2.55 2.6 2.8 2.75
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
EC-Declaration of conformity
D25102(K)/D25102C/D25103K/D25104K/
D25203K
DEWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014-1, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144: