Do you have a question about the DeWalt D25134 and is the answer not in the manual?
Voltage | 230 V |
---|---|
Hammering Action | Yes |
Max. Drilling Capacity [Steel] | 13 mm |
Tool Holder | SDS-Plus |
Max Drilling Capacity (Steel) | 13 mm |
Chuck Type | SDS-Plus |
Power Source | Corded |
Instructions for tool servicing by qualified personnel.
Safety precautions specific to rotary hammer operation.
Inherent risks associated with rotary hammer use.
Explanation of pictograms and markings found on the tool.
Lists all items included in the product package.
Details the components and features of the tool.
Specifies the intended applications and limitations of the tool.
Explanation of the torque limiting clutch feature.
Safety guidelines related to the tool's electrical system.
Instructions for replacing the mains plug for UK/Ireland.
Guidelines for using an extension cable with the tool.
Describes how to select operating modes for the tool.
Explains how to index and lock the chisel position.
Details the process of inserting and removing SDS Plus bits.
Instructions for attaching and positioning the side handle.
Information on the work light feature on specific models.
Guide on how to set the desired drilling depth.
Explains how to use the forward/reverse lever.
Instructions for fitting optional chuck adapter and chuck.
Steps to swap SDS Plus holder for a keyless chuck.
Guide for replacing the dust cover.
General instructions and warnings for operating the tool.
Demonstrates the correct way to hold the tool.
How to start, stop, and control the speed of the tool.
Instructions for drilling with hammer action.
Instructions for drilling without hammer action.
Instructions for driving screws with the tool.
Instructions for using the tool for chipping tasks.
General guidance on maintaining the tool's condition.
Information on the tool's automatic brush shut-off system.
Details regarding lubrication requirements for the tool.
Instructions for cleaning the tool safely.
Information on recommended optional accessories.
Guidelines for environmentally responsible disposal of the product.