Need help?Do you have a question about the DeWalt D25892 and is the answer not in the manual?
General| Type | Demolition Hammer |
|---|---|
| Tool Length | 18.5 inches |
| Chuck Type | SDS-Max |
| Variable Speed | Yes |
| Power Source | Corded |
| Impact Energy | 8.5 Joules |
Detailed technical specifications including voltage, power, and impact energy for the chipping hammer.
Emission sound pressure and sound power levels, along with vibration emission values and uncertainty.
Declaration of compliance with Machinery Directive and details of the notified body.
Definitions of DANGER, WARNING, CAUTION, and NOTICE for hazard identification.
Guidelines for safe work areas and precautions against electrical hazards.
Advice on personal safety, PPE, and proper tool handling and care.
Specific safety instructions for chipping hammers, including grip and accessory handling.
Identification of residual risks and electrical safety requirements like RCDs.
Instructions for mains plug replacement and using extension cables.
List of package contents, tool markings, and date code location.
Identification of tool parts and the intended applications for the chipping hammer.
Explanation of Active Vibration Control, Tool Tag readiness, and Electronic Speed/Impact Control.
Instructions for mounting and adjusting the side handle for proper tool operation.
Procedures for inserting, removing, and adjusting SDS MAX bits and chisel positions.
How to select operating modes, index chisel positions, and perform applications.
Guidelines for tool maintenance, lubrication, and cleaning procedures.
Advice on using approved accessories and proper environmental disposal.
To Next Page
