DeWalt D26411 User Manual

6
English
A. On/off switch E. Nozzle
B. Air vents F. Tool hanging ring
C. Kick-off stand G. Heat barrel cover
D. Air temperature adjustment knob
FIG.1
A
C
B
D
E
F
G
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and removing
accessories, before making any adjustments or removing/installing
attachments or accessories.
Setting the Air Temperature (Fig. 1)
The air temperature can be adjusted to suit a wide range
of applications. Turn the air temperature adjustment knob (D)
clockwise or counterclockwise for higher or lower heat. The table
below suggests settings for different applications.
Setting Applications
Low • Drying paint and varnish
• Removing stickers
• Waxing and dewaxing
• Drying wet timber prior to filling
• Shrinking PVC wrapping and insulation tubes
• Thawing frozen pipes
Medium • Welding plastics
• Bending plastic pipes and sheets
• Loosening rusted or tightly fastened
nuts and bolts
High • Removing paint and lacquer
• Soldering plumbing joints
ATTACH THE CORRECT ACCESSORY
This tool is supplied with a set of accessories for different
applications.
Icon Description Purpose
20
φ
Cone nozzle Welding, shrink sleeving
(heat concentrated over
small area)
50 mm Fish tail Drying, thawing
surface nozzle (heat spread
over wide area)
1. Make sure the on/off switch (A) is in position "O" and the tool
is disconnected from the power source. Ensure the nozzle has
cooled down.
2. Place the desired accessory onto the nozzle.

DeWalt D26411 Specifications

General

Input power	1800 W
Power source	AC
Maximum airflow	450 l/min
Minimum airflow	250 l/min
Working temperature (max)	600 °C
Working temperature (min)	50 °C
Product color	Black, Yellow

Weight and Dimensions

Depth	253 mm
Height	210 mm
Weight	800 g