1
FIG. 1
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.
EXTERNAL TOOL PARTS
MAGAZINE
TRIGGER
CONTACT TRIP
DEPTH
SETTING
EXHAUST
RAFTER HOOK
PUSHER
D51825-XE Clipped Head D51850-XE Full Round Head
Height 14-1/4" (36.4 cm) 14-1/4" (36.4 cm)
Width 6-1/2" (16.4 cm) 7-1/8" (18.0 cm)
Length 19" (48.2 cm) 21-1/4" (53.9 cm)
Weight 7.8 lb (3.54 kg) 7.9 lb (3.58 kg)
Magazine Angle 31˚ 20˚
Recommended Operating Pressure 70 - 120 psig (4.9 to 8.3 bar) 70 - 120 psig (4.9 to 8.3 bar)
Air consumption per 5.6 cfm @ 100 psi 5.6 cfm @ 100 psi
100 cycles 158.6 l/m @ 6.9 bar 158.6 l/m @ 6.9 bar
Air consumption per .056 cfm @ 100 psi .056 cfm @ 100 psi
single shoot 1.586 l/m @ 6.9 bar 1.586 l/m @ 6.9 bar
Loading capacity Up to 80 Nails Up to 65 Nails
TOOL SPECIFICATIONS
D51825-XE Clipped Head D51850-XE Full Round Head
Nail Lengths 2" - 3-1/2" (50 mm - 90 mm) 2" - 3-1/2" (50 mm - 90 mm)
Shank Diameters .113" - .131" (2.9 mm - 3.3 mm) .113" - .148" (2.9 mm - 3.8 mm)
Nail Stick Angles 30˚ - 34˚ 20˚ - 22˚
Shank Types Smooth, Ring, Screw Smooth, Ring, Screw
NAIL SPECIFICATIONS
To Next Page
Loading...
