DeWalt DCD708 Instruction Manual

1
ENGLISH
English (original instructions)
1
Battery pack
2
Battery pack release button
3
Main handle
4
Variable speed trigger switch
5
Forward/reverse control button
6
Mode selection collar
7
Speed selector
8
Worklight
9
Chuck sleeve
10
Keyless chuck
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or
any product, call
DeWALT
toll free at:
(1-800-433-9258).
1
2
3
4
5
6
8
9
10
7
Fig. A

DeWalt DCD708 Specifications

General

Voltage	20V
Chuck Size	1/2 inch
Max Power Output	340 UWO
Weight	2.4 lbs
Clutch Settings	15
Length	6.3 inches
No Load Speed	0-450 / 0-1650 RPM
Battery Type	Lithium-Ion