ENGLISH
3
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCD708 DCD709
Voltage
V
DC
18(20 Max) 18(20 Max)
Battery type
Li-Ion Li-Ion
Power output
W 340 340
No-load speed
1st gear
2nd gear
min
-1
min
-1
0–450
0–1650
0–450
0–1650
Beats per minute
1st gear
– 0–7650
2nd gear
– 0–28050
Max. Torque (hard/soft)
Nm 65/26 65/26
Chuck capacity
mm 1.5–13 1.5–13
Maximum
drilling
capacity
Wood
Metal
Masonary
mm
mm
mm
30
13
–
30
13
13
Weight (without battery pack)
kg 1.10 1.20
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
IEC60335 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
English (original instructions)
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD708, DCD709
Batteries Chargers/Charge Times (Minutes)
Cat# V
DC
Ah Weight(kg)
DCB107 DCB112 DCB115 DCB118 DCB132
DCB546 18/54 6.0/2.0 1.05 270 170 90 60 90
DCB547 18/54 9.0/3.0 1.46 420 270 140 85 140
DCB548 18/54 12.0/4.0 1.44 540 350 180 180 120
DCB181 18 1.5 0.35 70 45 22 22 22
DCB182 18 4.0 0.61 185 120 60 60 60
DCB183/B 18 2.0 0.40 90 60 30 30 30
DCB184/B 18 5.0 0.62 240 150 75 75 75
DCB185 18 1.3 0.35 60 40 22 22 22
DCB187 18 3.0 0.54 140 90 45 45 45
DCB189 18 4.0 0.54 185 120 60 60 60