DeWalt DCD792 User Manual

ENGLISH
3
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.
DCD792 DCD797
Voltage V
DC
18 18
Type 1 1
Battery type Li‑Ion Li‑Ion
Power output W 460 460
No‑load speed
1st gear min
‑1
0–550 0–550
2nd gear min
‑1
0–2000 0–2000
Impact rate
1st gear min
‑1
— 0–9350
2nd gear min
‑1
— 0–34000
Max. torque (hard/soft) Nm 70/27 70/27
Chuck capacity mm 1.5–13.0 1.5–13.0
Maximum drilling capacity
Wood mm 40 40
Metal mm 13 13
Masonry mm — 13
Weight (without battery pack) kg 1.1 1.2
Noise values and vibration values (triax vector sum) according to EN60745‑2‑1:
L
PA
(emission sound pressure level)
dB(A) 76 89
L
WA
(sound power level)
dB(A) 87 100
K (uncertainty for the given sound
level)
dB(A) 3 3
Drilling into metal
Vibration emission value a
h, D
=
m/s
2
<2.5 <2.5
Uncertainty K =
m/s
2
1.5 1.5
Drilling into concrete
Vibration emission value a
h, ID
= m/s
2
— 11.5
Uncertainty K =
m/s
2
— 1.6
Screwdriving
Vibration emission value a
h, D
=
m/s
2
<2.5 <2.5
Uncertainty K =
m/s
2
1.5 1.5
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
TOOL CONNECT™ CORDLESS 13mm DRILL/DRIVER, DCD792
TOOL CONNECT™ CORDLESS 13mm DRILL/DRIVER/
HAMMERDRILL, DCD797

DeWalt DCD792 Specifications

General

Brand	DeWalt
Model	DCD792
Category	Drill
Language	English