DeWalt DCD798 User Manual

final page size: 8.5 x 5.5 in
If you have questions or comments, contactus.
Pour toute question ou tout commentaire, nouscontacter.
Si tiene dudas o comentarios,contáctenos.
1‑800‑4‑DeWALT
DCD793
20V Max* Cordless Drill Driver
Perceuse‑visseuse sans fil 20V max*
Taladro/Destornillador inalámbrico 20 V Máx*
DCD798
20V Max* Cordless Hammer Drill
Perceuse à percussion sans fil 20V max*
Rotomartillo Inalámbrico 20 V Máx*
Instruction Manual
Guide D’utilisation
Manual de instrucciones

DeWalt DCD798 Specifications

General

Brand	DeWalt
Model	DCD798
Category	Drill
Language	English

Summary

Tool Components

Component Identification

Details the numbered parts of the tool, including the battery pack, handle, and chuck.

General Power Tool Safety Warnings

Work Area Safety

Essential guidelines for maintaining a safe and clear operating environment.

Electrical Safety

Critical precautions to prevent electric shock and related hazards.

Personal Safety

Key measures for operator protection, including alertness and PPE.

Power Tool Use and Care

Tool Operation and Maintenance

Guidelines for proper tool operation, upkeep, and handling.

Battery Tool Use and Care

Battery Handling and Charging

Instructions for safe battery use, charging, storage, and disposal.

Service and Repair

Tool Servicing Procedures

Drill/Impact Drill Specific Safety

General Operation Safety

Safety rules applicable to all drilling and impact drilling operations.

Long Drill Bit Safety

Additional Drill Safety Information

Specific Drill Warnings

Warnings related to drill operation, vibration, and hot components.

Batteries and Chargers

Battery Pack Safety Instructions

Critical safety advice for handling, charging, and storing battery packs.

Battery Charger Safety

Charger Safety Guidelines

General safety rules and precautions for using battery chargers.

Battery Charging Process

Charging Steps

Step-by-step instructions for charging a battery pack.

Charging Best Practices

Assembly and Adjustments

Installing Accessories into Chuck

Step-by-step process for inserting drill bits and accessories.

Operation Guide

Speed Selection

Tool Operation Details

Mode Selection

Battery Pack Installation

Proper Hand Positioning

Trigger and Control Button Usage

How to operate the variable speed trigger and forward/reverse control.

Performing Applications

Pre-Work Checks

Screwdriving Technique

Guidance on how to perform screwdriving tasks effectively.

Application Recommendations

Drilling Techniques

Drill Stall Procedures

Compatible Battery Packs and Chargers

20V Max* Li-Ion Compatibility

60V Max* Li-Ion Compatibility