To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCD985B and is the answer not in the manual?
General| Chuck Size | 1/2 in |
|---|---|
| Speed Settings | 3 |
| Clutch Settings | 22 |
| No Load Speed | 0-2, 000 RPM |
| Battery Type | Li-Ion |
Crucial to read and follow all warnings and instructions to prevent injury and keep information accessible.
Keep workspace clean, well-lit, and free from flammable materials or bystanders.
Match plugs to outlets, avoid grounded surfaces, keep tools dry, and use appropriate extension cords.
Stay alert, use PPE, prevent unintentional starts, and dress appropriately.
Use the correct tool for tasks, maintain it well, and disconnect power for adjustments.
Use only designated DEWALT chargers and battery packs for safe operation.
Wear ear protection during impact drilling and use auxiliary handles for better control.
Hold tool by insulated surfaces and secure workpiece to prevent loss of control.
Always wear safety goggles and use appropriate respiratory protection for dust hazards.
Avoid explosive atmospheres, water, and extreme temperatures when charging or using battery packs.
Only use designated DEWALT chargers, do not force battery packs to prevent damage or injury.
Do not incinerate Li-Ion packs; handle skin contact with soap and water.
Battery liquid may be flammable; seek medical attention for eye contact.
Avoid liquid ingress, use only DEWALT packs, and keep cavities free of foreign materials.
Do not expose chargers to elements, use correct extension cords, and ensure ventilation.
Handle cords carefully, ensure they are not damaged, and disconnect by pulling the plug.
Handle chargers carefully, avoid damage, and use only with specified voltage and conditions.
Step-by-step guide for inserting battery pack into charger and initiating charge.
Interpreting light signals for charging status, hot/cold delay, and problem detection.
Guidance on leaving a fully charged battery pack connected to the charger.
Information on identifying and handling weak or faulty battery packs.
Charge batteries within specific temperature ranges for best life and performance.
Steps to take if a battery pack is not charging properly, including checking power and location.
Diagram and list of all parts of the power tool, labeled A through M.
Operation of the forward/reverse button for direction selection and lock-off.
How the integrated worklight activates and deactivates during tool use.
Selecting between drilling, screwdriving, and hammerdrilling modes using the collar.
Setting the torque adjustment collar for driving various fasteners.
Shifting gears for different torque and speed settings for versatility.
Steps for inserting and securely tightening drill bits or accessories.
Instructions for attaching optional belt hook and bit clip accessories securely.
Procedure for inserting and removing the battery pack from the tool handle.
How to check the remaining charge level using the LED fuel gauge.
Tips for drilling thin materials, using sharp bits, and managing drill stalls.
Selecting torque settings, performing practice runs, and avoiding workpiece damage.
Using carbide bits, applying correct force, and drilling straight for efficiency.
Instructions for cleaning air vents, tool exterior, and charger, avoiding harsh chemicals.
Table of maximum recommended capacities for various accessories with DCD980 and DCD985.
Benefits of registering for warranty service, confirmation of ownership, and safety notifications.
Coverage for defects, exclusions, free service periods, and contact information.
90-day satisfaction guarantee and procedure for obtaining free warning label replacements.
