DeWalt XR DCD791 - User Manual

DCD791
DCD796

DeWalt XR DCD791 Specifications

General

Voltage	18V
Chuck Capacity	1.5-13 mm
No Load Speed	0-550/2000 RPM
Max Torque	70 Nm
Max. Drilling Capacity [Wood]	40 mm
Max. Drilling Capacity [Steel]	13 mm
Chuck Type	Keyless
Battery Type	Li-Ion
Power Output	460 Watts

Summary

Technical Data

EC-Declaration of Conformity

Machinery Directive

Declaration of conformity for machinery safety directives.

Drill;Driver;Impact Drill DCD791, DCD796

Product identification for EC declaration.

DECLARATION OF CONFORMITY THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS 2008

DRILL;DRIVER;IMPACT DRILL DCD791, DCD796

Products compliant with UK Machinery Safety Regulations.

Definitions: Safety Guidelines

GENERAL POWER TOOL SAFETY WARNINGS

1) Work Area Safety

2) Electrical Safety

3) Personal Safety

4) Power Tool Use and Care

5) Battery Tool Use and Care

6) Service

Additional Specific Safety Rules for Drills; Drivers;Impact Drills

Chargers

Electrical Safety

Electrical safety considerations for DEWALT chargers.

Mains Plug Replacement (U.K. & Ireland Only)

Procedure for replacing the mains plug in the UK and Ireland.

Important Safety Instructions for All Battery Chargers

Using an Extension Cable

Guidelines for using extension cables with chargers.

Charger Cleaning Instructions

Battery Packs

Important Safety Instructions for All Battery Packs

Crucial safety advice for handling and using battery packs.

Transporting the FLEXVOLT Battery

Storage Recommendations

Labels on Charger and Battery Pack

Markings on Tool

Date Code Position (Fig. A)

Location and format of the tool's date code.

Description (Fig. A)

Intended Use

ASSEMBLY AND ADJUSTMENTS

Inserting and Removing the Battery Pack from the Tool (Fig. B)

Instructions for installing and removing the battery pack.

Fuel Gauge Battery Packs (Fig. B)

Explanation of the battery fuel gauge indicator.

Belt Hook and Magnetic Bit Holder (Fig. A)

Guidance on using optional belt hook and magnetic bit holder.

Variable Speed Trigger Switch (Fig. A)

Forward;Reverse Control Button (Fig. A)

Torque Adjustment Collar (Fig. A)

Dual Range Gearing (Fig. A)

OPERATION

LED Worklight (Fig. A)

Description and operation of the LED worklight.

Low Battery Warning

How the tool indicates a low battery condition.

Keyless Single Sleeve Chuck (Fig. G-I)

Instructions for using the keyless chuck to change accessories.

Drill Operation (Fig. A, D)

Hammerdrill Operation (Fig. A, E)

Screwdriver Operation (Fig. A, F)

MAINTENANCE

Protecting the Environment

Rechargeable Battery Pack