DeWalt DCE089G - User Manual

DCE089G, DCE089R
3 x 360° Line Laser
E
Please read these instructions before operating the product.
www.DEWALT.eu
www.DEWALT.co.kr
제품을 작동하기 전에 본 설명서를 읽으십시오.
E
KR

Summary

User Safety

Definitions: Safety Guidelines

Defines levels of severity for safety signal words like DANGER, WARNING, CAUTION, NOTICE.

Product Overview

Personal Safety

Tool Use and Care

Operation

To Turn the Lasers On and Off

Instructions for powering the laser tool on and off using the keypad and lock switch.

Using the Lasers

Using the Pivot Bracket

Maintenance

Accuracy Check and Calibration

Procedures for checking and calibrating the laser's accuracy.

Checking Accuracy - Horizontal Beam, Pitch Direction

Checking Accuracy - Vertical Beam

Checking 30° Accuracy Between Vertical Beams

Troubleshooting

The Laser Does Not Turn On

Lists common reasons why the laser may not power on and solutions.

The Laser Beams Flash

The Laser Beams Will Not Stop Moving

Service and Repairs

Specifications

DeWalt DCE089G Specifications