DeWalt DCF911 - Tool Assembly and Operation; Product Description and Intended Use; Battery Pack Installation and Removal

9
ENGLISH
s
Do not expose towater.
t
Have defective cords replacedimmediately
u
Charge only between 4˚C and 40˚C.
v
Only for indooruse.
x
Discard the battery pack with due care for
theenvironment.
y
Charge DeWALT battery packs only with designated
DeWALT chargers. Charging battery packs other
than the designated DeWALT batteries with a
DeWALT charger may make them burst or lead to
other dangeroussituations.
z
Do not incinerate the batterypack.
B
USE (without transport cap). Example: Wh rating
indicates 108Wh (1battery with 108Wh).
A
TRANSPORT (with built‑in transport cap). Example:
Wh rating indicates 3x 36Wh (3batteries of 36Wh).
Battery Type
The following tools operate on an 18(20V Max) volt battery
pack: DCF911.
These battery packs may be used: DCB181, DCB182,
DCB183, DCB184, DCB185, DCB187, DCB189, DCB203,
DCB204, DCB205, DCB546, DCB547, DCB548, DCB606,
DCB609, DCB612, DCBP034. Refer to Technical Data for
moreinformation.
Package Contents
The package contains:
1 Impact wrench
1 Charger (Except DCF911N)
1 Belt hook
1 Li‑Ion battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li‑Ion battery packs (C2, D2, E2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li‑Ion battery packs (C3, D3, E3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual beforeuse.
g
Wear earprotection.
f
Wear eyeprotection.
n
Visible radiation. Do not stare intolight.
Date Code Position (Fig. B)
The date code
10
, which also includes the year of
manufacture, is printed into thehousing.
Example:
2021XX XX
Year and Week of Manufacture
Description (Fig. A, B)

WARNING: Never modify the power tool or any part of
it. Damage or personal injury couldresult.
1
Battery pack
2
Battery release button
3
Trigger switch
4
Forward/reverse control button
5
Anvil
6
Main Handle
7
Worklight
8
Belt hook
9
Screw
Intended Use
These impact wrenches are designed for professional impact
fastening applications. The impact function makes this
tool particularly useful for driving fasteners in wood, metal
andconcrete.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
These impact wrenches are professional powertools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons
(including children) suffering from diminished physical,
sensory or mental abilities; lack of experience, knowledge
or skills unless they are supervised by a person
responsible for their safety. Children should never be left
alone with thisproduct.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start‑up can causeinjury.

WARNING: Use only DeWALT battery packs
andchargers.
Inserting and Removing the Battery Pack
from the Tool (Fig.B)
NOTE: Make sure your battery pack
1
is fullycharged.