DeWalt DCF964 - Page 24

22
ENGLISH
EC-Declaration of Conformity
Machinery Directive
Impact Wrench
DCF961, DCF964
DeWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN 62841-1:2015+A11:2022 and EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at the
following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
22.04.2024
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY SAFETY
REGULATIONS 2008
IMPACT WRENCH
DCF961, DCF964
DeWALT declares that these products described under
Technical Data are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN 62841-1:2015+A11: 2022and EN 62841-2-2:2014.
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCF961 DCF964
Voltage V
DC
18 18
Type
1 1
Battery type
Li‑Ion Li‑Ion
Power output
W 870 1100
No load speed min
‑1
0‑440/800/1200 0‑440/575/1200
Impact rate min
‑1
0–1890 0–2015
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Nm
Nm
Nm
Nm
1496
135
1220
1626
1728
677
1138
1925
Max breakaway torque Nm 2372 2576
Weight (without battery pack) kg
3.5 3.7
Noise values and vibration values (triax vector sum) according to EN62841‑2‑2:
L
PA
(emission sound pressure
level)
dB(A) 100 100
L
WA
(sound power level)
dB(A) 108 108
K (uncertainty for the given
sound level)
dB(A) 3 3
Vibration emission value a
h
=
m/s
2
21.0 16.0
Uncertainty K = m/s
2
6.3 4.4
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
18V XR 1/2" HIGH TORQUE IMPACT WRENCH WITH HOG
RING ANVIL
18V XR 3/4" HIGH TORQUE IMPACT WRENCH WITH HOG
RING ANVIL
DCF961, DCF964
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the