Need help?Do you have a question about the DeWalt DCG406 and is the answer not in the manual?
General| Type | Accessory set |
|---|---|
| Product color | Black, Grey, Yellow |
| Type of sander | Disc sander |
| Housing material | Aluminium, Plastic, Rubber |
| Dust extraction port | No |
| Suitable for materials | Ceramic, Metal |
| Power | 1000 W |
| On/off switch | Yes |
| Sanding disc thread | M14 |
| Idle speed (max) | 9000 RPM |
| Sound power level | 96 dB |
| Sound pressure level | 85 dB |
| Amperage | 5 A |
| Output power | 800 W |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 310 mm |
|---|---|
| Weight | 1750 g |
| Sanding disc diameter | 125 mm |
Details specifications like voltage, battery type, power output, speed, dimensions, and weight.
Imminent hazard, death or serious injury if not avoided.
Potentially hazardous situation, death or serious injury if not avoided.
Potentially hazardous situation, minor or moderate injury if not avoided.
Grip tool firmly with both hands and position body to resist kickback forces.
Keep hands away from the rotating accessory to prevent injury from kickback.
Exercise care with corners and sharp edges to avoid snagging and kickback.
Use only wheels specified for the tool and the correct guard.
Avoid jamming or excessive pressure to prevent wheel breakage or kickback.
Position body away from the rotating wheel to avoid kickback injury.
Do not use Type 11 flaring cup wheels as inappropriate accessories can cause injury.
Always use the side handle securely to maintain control of the tool.
Detailed steps for mounting and adjusting the guard for optimal protection.
General instructions and warnings for operating the power tool safely.
To Next Page
