To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCG413B and is the answer not in the manual?
General| Product color | Black, Yellow |
|---|---|
| Adjustable speed | No |
| Idle speed (max) | 9000 RPM |
| Grinding disc diameter | 115 mm |
| Power source | Battery |
| Battery voltage | 20 V |
Weight and Dimensions| Weight | 1700 g |
|---|
Emphasizes reading all safety warnings and instructions before use.
Guidance on maintaining a safe and well-lit work area to prevent accidents.
Precautions related to power tool plugs, cords, and outdoor use.
Advice on staying alert, using protective equipment, and preventing unintentional starts.
Guidelines for using, maintaining, and storing power tools safely and effectively.
Instructions for charging, handling, and storing battery packs.
General safety precautions applicable to various tool operations like grinding and sanding.
Information and precautions to avoid kickback incidents during operation.
Safety guidelines for performing grinding and abrasive cutting-off tasks.
Further safety advice for abrasive cutting-off operations, focusing on wheel usage.
Safety precautions to be followed during sanding operations.
Safety guidelines for performing wire brushing tasks.
Mandatory use of ANSI Z87.1 approved eye protection during operation.
Safety warnings and instructions for charging and using battery packs.
Instructions for inserting the battery pack into the charger for charging.
Explanation of the Electronic Protection System protecting the battery pack from damage.
Steps to troubleshoot common battery charging problems.
Explanation of the electronic brake that stops the wheel during kickback events.
Description of the overload protection that reduces motor power or shuts off the tool.
Warning to turn off the tool and remove battery before making adjustments or installing attachments.
Step-by-step instructions for securely attaching the side handle.
Instruction to ensure the side handle is securely tightened before tool use.
Requirement to use guards with various types of wheels and brushes.
Warning to disconnect power before adjusting or mounting the guard.
Step-by-step instructions for mounting the guard onto the tool.
Warning to turn off and unplug the tool before working with flanges and wheels.
Warning about the serious injury risk from improperly seated flanges or wheels.
Requirement to reinstall guards after completing sanding operations.
Mandatory use of a closed, two-sided guard for cutting wheels.
Warning about injury risk from using damaged or improper flanges and guards.
Warning about serious injury risk from improperly seated clamp nuts or pads.
Notice regarding potential damage from improperly seated wheels.
Warning about serious injury risk from improperly seated wire brushes or wheels.
Warning to prevent contact between wire brushes/wheels and the guard.
Notice regarding potential damage from improperly seated wire brush or wheel hubs.
Ensure guard and accessories are installed and not excessively worn.
Verify that the backing flange and locking flange are mounted correctly.
Instructions to inspect accessories for chips, cracks, or wear before each use.
Warning to turn off and remove battery before making adjustments or installing accessories.
Step-by-step instructions for installing the battery pack into the tool handle.
Instructions for removing the battery pack from the tool handle.
Emphasis on using the correct hand position as shown for personal safety.
Advice to hold the tool securely to anticipate and manage sudden reactions.
Advice to hold the tool firmly during paddle switch operation for control.
Instruction to depress and release the paddle switch before inserting the battery.
Procedure for resetting the paddle switch after unexpected tool shutdowns.
Steps to turn the tool on by operating the lock-off lever and paddle switch.
Steps to turn the tool off by releasing the paddle switch.
Safety instructions for operating the spindle lock only when the tool is off and battery removed.
Notice regarding the risk of tool damage from engaging the spindle lock while operating.
Caution to always use the correct guard as per manual instructions for surface operations.
Steps for performing work on the surface of a workpiece.
Steps to follow when powering off the tool, including lifting and stopping rotation.
Discourages sanding or wire brushing lead-based paint due to dust contamination risks.
Requirement for all persons entering the work area to wear a dust mask or respirator.
Warning against using edge grinding/cutting wheels for surface grinding due to side pressure risks.
Caution that edge grinding/cutting wheels may break or kick back if they bend or twist.
Limit for shallow cutting and notching with Type 27 wheels to less than 13 mm depth.
Requirement to use a Type 1 guard for edge grinding/cutting with a Type 41 wheel.
Warning that changing the angle can cause wheel bending and breakage.
Note that edge grinding wheels cannot withstand side pressures from bending.
Steps to follow when powering off the tool after edge grinding or cutting.
Warning to turn off and remove battery pack before performing maintenance.
Warning about hazardous use of non-DEWALT accessories due to lack of testing.
Requirement for repairs and maintenance to be performed by authorized DEWALT service centers.
Guidance on using Type 1/41 guards with specific cutting wheels.
