DeWalt DCG414 - User Manual

Other manuals for DeWalt DCG414

Original Instructions232 pages

Need help?

Do you have a question about the DeWalt DCG414 and is the answer not in the manual?

Summary

Definitions: Safety Alert Symbols and Words

GENERAL POWER TOOL SAFETY WARNINGS

Work Area Safety

Electrical Safety

Use correct plugs, avoid contact with grounded surfaces, protect from rain and wet conditions.

Personal Safety

Stay alert, use PPE, prevent unintentional starts, maintain proper footing and balance.

Power Tool Use and Care

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

Safety Warnings Common for Grinding, Sanding, Wire Brushing, Polishing or Abrasive, Cutting-Off Operations

Follow all instructions; do not use for polishing; use recommended accessories and match speed ratings.

Kickback and Related Warnings

Maintain Firm Grip and Position for Kickback

Hold tool firmly, position body to resist kickback forces and torque reaction.

Avoid Kickback Hazards

Keep hands away from rotating accessory; avoid corners, sharp edges, and bouncing.

Do Not Use Saw Blades

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Use Recommended Wheels and Guards

Mount Wheels Correctly

Additional Safety Warnings Specific for Abrasive Cutting-Off Operations

Avoid Jamming and Apply Proper Pressure

BATTERIES AND CHARGERS

Important Safety Instructions for All Battery Packs

Follow safety warnings; avoid explosive atmospheres; never force pack into charger.

Important Safety Instructions for All Battery Chargers

Follow safety warnings; use only specified chargers; not for other uses.

Important Charging Notes

Troubleshooting Charging Issues

Intended Use

E-Clutch

Kickback Brake

Power-OFF OVERLOAD Protection

ASSEMBLY AND ADJUSTMENTS

Attaching Side Handle (Fig. D)

Guards

Ensure correct guards are used for all applications and are securely attached.

Mounting Non-Hubbed Wheels (Fig. H)

Mounting and Removing Hubbed Wheels (Fig. J)

Adjusting and Mounting Guard (Fig. F, G)

Setting Guard Adjustment Options

Mounting Guard (Fig. G)

Flanges and Wheels

Mounting Wire Cup Brushes and Wire Wheels

OPERATION

Installing and Removing the Battery Pack (Fig. K)

Proper Hand Position (Fig. L)

Trigger Switch and Lock-off Lever (Fig. M)

Push lock-off lever, depress trigger to turn on; release trigger to turn off.

Spindle Lock Button (Fig. N)

Surface Grinding, Sanding and Wire Brushing (Fig. O)

Edge Grinding and Cutting (Fig. P)

MAINTENANCE

Cleaning the Tool

Repairs

DeWalt DCG414 Specifications

General

Product color	Black, Yellow
Battery charger included	Yes
Power source	Battery
Battery voltage	54 V
Battery capacity	6 Ah
Spindle thread	M14
Idle speed (max)	9000 RPM
Sound power level	95 dB
Sound pressure level	84 dB
Grinding disc diameter	125 mm
Vibration level (sanding)	2.9 m/s²
Vibration level (grinding)	5.9 m/s²
Vibration level uncertainty (grinding)	1.5 m/s²
Sound power level uncertainty	3 dB