DeWalt DCK665P3T - Page 110

36
ENGLISH
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge
DeWALT
battery packs only with designated
DeWALT
chargers. Charging battery packs other than
the designated
DeWALT
batteries with a
DeWALT
charger may make them burst or lead to other
dangeroussituations.
Do not incinerate the batterypack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3batteries of 36 Wh).
Battery Type
The DCS391 operates on an 18V XR Li-Ion batterypack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB548. Refer to Technical
Data for moreinformation.
Package Contents
The package contains:
1 Cordless circular saw
1 24-tooth blade
1 Hex key
1 Rip Guide
1 Plastic bag (QW, XJ, GB):
1 Dust extraction port
1 M4 X 18 Cap screw
2 Li-Ion battery packs (L2, M2 models)
1 Kitbox (L2, M2 models)
1 Charger (L2, M2 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® battery packs.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by
DeWALT
is under license. Other trademarks and
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Date Code Position (Fig. B)
The date code
23
, which also includes the year of manufacture,
is printed on the batteryport.
Example:
2021 XX XX
Year of Manufacture
Description (Fig.A,F)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Trigger switch lock-off button
2
Trigger switch
3
Battery pack
4
Depth adjustment lever
5
Shoe
6
Lower blade guard retracting lever
7
Lower blade guard
8
Blade clamping screw
9
Kerf indicator
10
Bevel adjustment knob
11
Blade lock button
12
Auxiliary handle
13
Battery release button
14
Hex key
15
Rip guide knob
16
Rip guide
Intended Use
Your DCS391 cordless circular saw has been designed for
professional wood sawingapplications.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
These heavy-duty circular saws are professional powertools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.