10
ENGLISH
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge DeWALT battery packs only with designated
DeWALT chargers. Charging battery packs other
than the designated DeWALT batteries with a
DeWALT charger may make them burst or lead to
other dangeroussituations.
Do not incinerate the batterypack.
USE(without transport cap). Example: Wh rating
indicates 108 Wh(1 battery with 108 Wh).
TRANSPORT(with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh(3batteries of 36Wh).
Battery Type
The DCP580 operates on an 18 volt batterypack.
These battery packs may be used: , DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB546. Refer to
Technical Data for moreinformation.
Package Contents
The package contains:
1 Planer
1 Rebate fence
1 T25 star key
1 T-handle hex wrench
1 Gauge plate
1 Pair of blades(kitted models only)
1 Dustbag(kitted models only)
2 Li-Ion battery packs(kitted models only)
1 TSTAK kitbox(kitted models only)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by
DeWALT is under license. Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Date Code Position(Fig.A)
The date code
29
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Trigger switch
2
Lock-off button
3
Main handle
4
Rear shoe
5
Drive belt cover
6
Hole for rebate fence
7
Front shoe
8
Rebate fence tightening knob
9
Planing depth graduation
10
Planing depth adjustment knob/ front handle
11
Chip ejection port
12
AirLock connection
13
Blade storage knob
14
Battery
15
Battery release button
16
Fuel gauge button
Intended Use
Your planer has been designed for professional planing
ofwood.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This planer is a professional powertool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons(including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.