To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCL079 and is the answer not in the manual?
General| Runtime | up to 11 hours |
|---|---|
| Light Source | LED |
| IP Rating | IP54 |
| Material | Plastic and Metal |
| Light Modes | High, Medium, Low |
| Hanging Hook | Yes |
| Battery Voltage | 20V |
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Covers basic use, shock, hot parts, damage, water immersion, attachments, and eye exposure.
Covers fire hazard, liquid submersion, intended use, supervision, storage, battery charging, heat, and disassembly.
Summary of critical safety instructions specific to the tripod light operation.
Covers hazards like explosive atmospheres, charger compatibility, storage, tampering, incineration, and skin contact.
Covers general transport safety and specific FLEXVOLT battery shipping modes.
Explanation of the LED fuel gauge that indicates the battery charge level.
Information regarding the RBRC seal and environmentally conscious battery recycling.
Covers charger use, cleaning, extension cords, outdoor use, and cord gauge requirements.
Details the charging process, indicators, and status for battery packs.
Information regarding FCC, IC, and Bluetooth compliance and regulations.
Explanation of charging status indicators, hot/cold pack delay, and fault detection.
Describes the tool's protection against overloading, overheating, and deep discharge.
Guidance on how to securely mount the charger to a wall.
Best practices for optimal battery performance and longevity during charging.
Step-by-step instructions for setting up the tripod light from its collapsed state.
Instructions on how to adjust the extension poles to achieve the desired light head height.
Safety precautions to observe during assembly and adjustment of the tripod light.
Guidance on how to properly collapse and carry the tripod light for transport.
Recommendations for safely storing the tripod light when not in use.
Instructions for installing and removing the battery pack from the tripod light.
How to turn the light on/off and adjust brightness settings.
How to recognize and respond to the low battery warning indicator.
Recommendations for accessories and guidelines for product repairs and service.
Importance and process of registering your product for warranty service and safety notifications.
Details of the three-year limited warranty covering defects in materials and workmanship.
Information on free service, money-back guarantee, and free warning label replacement.
