WALT one of the most reliable partners for professional power tool users.
Technical Data
DCM563
Voltage
V
DC
18
UK & Ireland
V
DC
18
Type 1
Blade strokes (no load) min
-1
1400
Blade length cm 55.8
Blade gap mm 19
Blade break time s <1
Weight kg 3.5
Weight (without battery pack) kg 2.9
Noise values and vibration values (triax vector sum) according to 2006/42/EC, 2004/108/EC EN 60745
L
PA
(emission sound pressure level)
dB(A) 80.5
L
WA
(sound power level)
dB(A) 98
K (uncertainty for the given sound level)
dB(A) 6.5
Vibration emission value a
h
=
m/s
2
2
Uncertainty K =
m/s
2
1.5
HEDGE TRIMMER
DCM563
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission levelasdfarepresents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
Battery pack
DCB180 DCB181 DCB182 DCB183 DCB184 DCB185
Battery type Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion Li-Ion
Voltage
V
DC
18 18 18 18 18 18
Capacity A
h
3.0 1.5 4.0 2.0 5.0 1.3
Weight kg 0.64 0.35 0.61 0.40 0.62 0.35
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
