DeWalt DCMPS520 User Manual

4
ENGLISH
EC-Declaration of Conformity
Machinery Directive
o
Pruner Saw
DCMPS520
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+A11:2022, VDE-PB-0023:2022-08.
EC type-examination by
VDE Prüf- und Zertifizierungsinstitut GmbH
Merianstraße 28, 63069 Offenbach, Germany
Notified Body number : 0366
ID number: 40056737
2000/14/EC, Annex V
L
WA
(measured sound power level) 96 dB(A)
L
WA
(guaranteed sound power) 99 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
10.05.2023
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCMPS520
Voltage V
DC
18
Type 1
Battery type Li‑Ion
Bar Length cm 20
Maximum Chain Speed (no‑load) m/s 8.6
Maximum Cutting Length cm 15
Oil Capacity ml 55
Weight (without battery pack) kg 2.1
Noise values and vibration values (triax vector sum) according to EN62841‑4‑1:
L
PA
(emission sound pressure level at no load) dB(A) 84
L
WA
(sound power level at no load) dB(A) 92
K (uncertainty for the given sound level) dB 3.0
Vibration emission value a
h
= m/s
2
4.7
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
18V PRUNER SAW
DCMPS520

DeWalt DCMPS520 Specifications

General

Brand	DeWalt
Model	DCMPS520
Category	Pole Saw
Language	English